| Form |
Stereo Integrated Amplifier |
Output power
(Both channel operation, 20Hz - 20kHz, 0.1% of distortion) |
140 W/ch (4ohms)
100 W/ch (8ohms)
50 W/ch (16ohms) |
THD
(20Hz - 20kHz, High Level Input) |
0.1% (at the time of an Output power)
0.05% (at the time of -3dB output) |
| IM distortion (High Level Input) |
0.1%
(at the time of an Output power arbitrary frequency for 20Hz - 20kHz) |
Frequency response
(at the time of 8 ohms and an Output power) |
Main Amp Input: 20Hz-20kHz+0 -0.2dB
High Level Input: 20Hz-20kHz+0 -0.5dB
Low Level Input: 20Hz-20kHz+0 -1.0dB |
| Dumping factor (8-ohm load, 40Hz) |
Normal:50
Medium:5
Soft:1 |
| A rated input / impedance |
Main Amp Input: 1.0V/100kohm
High Level Input: 160mV/100kohm
DISC1 Input: 2.5mV - 5mV / 30kohm, 47kohm, 100kohm
DISC2 Input: 2.5mV / 47kohm |
| The DISC maximum input (0.05% of a distortion, 1kHz) |
| DISC1: |
300mVrms (level-control maximum)
600mVrms (level-control minimum) |
| DISC2: |
300mVrms | |
| An Output power/Output load impedance |
Preamp Output: 1.0V/600 ohm
Tape Recording Output: 160mV/200 ohms
Headphones: 0.28V (conformity impedance: 4ohms - 32ohms) |
| Gain |
Main Amp Input->Output: 29dB
High Level Input->Preamp Output: 16dB
Low Level Input->Tape Rec Output: 36dB |
| S/N |
Main Amp Input: 94dB (rated input)
High Level Input: 80dB (rated input)
DISC Input: 74dB (10mV input) |
| Volume control linkage error |
1dB |
| Tone control |
| Turnover frequency |
Bass:400Hz
Treble:2.5kHz |
| Conversion range |
Bass: ±10dB (100Hz)
Treble: ±10dB (10kHz) | |
| Compensation (Volume-30dB) |
+9dB(50Hz) |
| DISC low enhancement |
It is +1dB (100Hz) to RIAA. |
| Filter |
DISC Subsonic Filter: 25Hz, 6 dB/oct
A low filter: 30Hz, 18 dB/oct
A high filter: 5kHz, 12 dB/oct |
| Power meter |
100W (0dB, 8-ohm load)
| At the time of a meter range change : |
-10dB(10W=0dB)
-20dB(1W=0dB) | |
| The semiconductor used |
Transistor: 53 pieces
FET: Four pieces
Diode: 44 pieces
Thermo sensitive register: Two pieces |
| Power supply voltage |
AC100V/117V/220V/240V, 50Hz/60Hz |
| Power consumption |
At the time of no inputting: 70W
At the time of an 8ohm load Output power: 375W |
| Dimensions |
Width 455x height 152x depth of 355mm |
| Weight |
19.5kg |
| Option |
Wood cabinet A-3 |
