|
 | | | | | |  Specifications - Design: Two-Channel Solid State Power Amplifier
- Power Capabilities: •300W into 8 Ohms (500W into 4 Ohms), 900W into 8 Ohms (Bridged Mono
- MFR: 1 Hz – 100 kHz
- Inputs: RCA Unbalanced, XLR Balanced
- Distortion < 0.005% from 20Hz to 20kHz at rated output into 8 Ohms
- IM or THD+noise < 0.007% from 20Hz to 20kHz at rated output into 4 Ohms
- Noise (Measured with input shorted; 20Hz. to 20kHz.)
> 110dB below rated output @ 29dB gain (-75dBu)
> 113dB below rated output @ 23dB gain (-78dBu)
> 116dB below rated output @ 17dB gain (-78dBu)*
*setting available on models 6B & 9B only - Slew rate Greater than 60 volts per microsecond
- Power bandwidth From less than 1 Hz to over 100 kHz
- Damping factor Over 300 at 20 Hz, ref. 8 Ohms
- Input Impedance 50k Ohms single ended, 40k Ohms balanced
- Dimensions: 5.25″ H x 17.25″ W x 19″ D
- Weight: 50 Pounds
| | Bryston BP6  Specifications • Class A discrete operational amplifiers
• Input: 4x RCA single ended pairs, RCA single ended (tape loop), SPDIF (RCA)
• Output: 2x RCA single ended pairs
• Four pairs of high level stereo inputs
• Gold plated input and output contact surfaces
• New C-Series cosmetics.
• All signal circuitry is fully discrete to avoid the compromises, phase shift and nonlinearities inherent in IC’s.
• Headphone output on the front panel allows for monitoring and private listening.
• Optional Bryston internal DAC.
• Optional Bryston MM Phono Stage.
• Available with silver or black faceplate
• 17” or 19” faceplate available (non-rack mountable)
• Optional internal DAC or internal MM phono
• BR2 remote control available 전원:110V |
|
