SPECIFICATIONS Continuous effective output
 110W + 110W/8Ω
200W + 200W/4Ω
 
Input
 4 line systems
Phono 1 system (MM/MC switchable)
2 balanced line inputs
 
Sound recording input/output
 2 line systems
 
Pre- output and main input
 1 system, each
 
Speaker output
 A, B 2 systems
 
Amplifier version
 ODNF 3.0
 
Output constitution
 Bipolar parallel PP
 
Power transformer
 
 
Damping factor
 
 
Harmonic Distortion
  or less
  ( 8Ω at 1KHz)
 
 or less
  (8Ω and 20Hz~20KHz)
 

 
 
Input sensitivity/impedance
 PHONO (MM)
 : 2.5mV/47KΩ
 
PHONO (MC)
 : 0.3mV/100Ω
 
LINE
 : 180mV/42KΩ
 
BAL. LINE
 : 180mV/79KΩ
 
MAIN-IN
 : 1V/51KΩ
 

 
 
Output voltage
 TAPE: 180mV and PRE-OUT: 1V
 
Signal-to-Noise Ratio

(IHF-A)
 PHONO (MM)
 : Above  
 
PHONO (MC)
 : Above
 
LINE
 : Above
 

 
 
Frequency characteristic
 PHONO
 : 20Hz~20,000Hz (±0.5dB)
 
LINE
 : 20Hz~100KHz (+0dB ~ -3dB)

 

Controls	Front panell :    Volume and input selector, meter, power switch, monitor switch, [phono] MC switch, REC out switch,  speaker selector, stereo / mono mode selector, bass (±10dB @ 100Hz) & treble (±10dB @ 10kHz) tone controls, subsonic filter (9 Hz) and balance control, line straight switch (tone controls bypass), separate switch (splits the internal preamp from the amplifier) meter light and headphone jack, power on indicator and protection indicator   Rear panel ： Balanced phase inverter, signal ground and line phase sensor, AC inlet. Remote Control
Electric power consumption	1.2W (stand-by),  82W (idle),   260W  (rated output)
Dimensions W x H x D	18.3” (467mm) 7” (179) 17.25” (437)
Weight	50 lbs.    (22.5kg) nett.  62 lbs shipping