V6001 Plus
Rugged Professional Powered Amplifier

Output Power: 2 ohms, 1 khz 1% THD
2530W RMS per channel 4 ohms, 1 khz 1% THD
1920W RMS per channel 8 ohms, 1 khz 1% THD
1260W RMS per channel (Bridged Mode, mono) 4 ohms, 1 khz 1% THD
5100W RMS per channel 8 ohms, 1 khz 1% THD
3650W RMS per channel
Total Harmonic Distortion (THD): Less than 0.03% (20Hz-20kHz, @ 4 Ohms)

Input Sensitivity & Impedance: 1.0v rms (0 dBv) (@ 8 Ohms)

Dimensions & Weight: Height : 5.25” (13.3cm) Width: 19” (48.3cm)
Depth: 15.9” (40.5cm) Weight: 62 lbs (28 kg)

Frequency Response: ±.5dB, 1W RMS 8 ohms (10Hz - 35 kHz) ±3dB, 1W RMS 8 ohms (5Hz - 85 kHz)

Hum & Noise: 100 dB, unweighted (@ 8 Ohms)

Signal to Noise Ratio: 100 dB , unweighted (@ 4 ohms full power) “A” Weighted

Slew Rate: 25v/usec

Damping Factor: 500 (@ 8 Ohms)

Protection Circuit: DC output protection, Overload protection Short circuit protection, On & Off protection

Special Features: Sub Woofer Crossover 20-200Hz LED mode indicator Contractor Smart™ Feature (Switch on rear panel to disable front volume controls)

Power Consumption: 53A @ 120V AC (@ 4 Ohms) / 25.5A @ 240V AC (@ 4 Ohms)

Turn-On Thump Protection: Yes

Cooling System: Dual 2 speed fans & heatsink