|
Á¦Ç°»ç¾ç
50W x 2 Continuous Power into 4 ohms and 8 ohms 100W, 150W, 200W IHF Dynamic power into 8, 4 and 2 ohms, respectively PowerDrive¢â circuit NAD SR 8 Full System Remote control Headphone socket Front panel Media Player (MP) input for attaching portable MP3 Player Relay Input Switching Holmgren Toroidal Power transformer 7 Line inputs, including one tape in/out All discrete circuitry Short signal path from input to output All sockets Gold plated Tone controls defeat switch Main-amp input & pre-amp outputs Subwoofer (mono) Out Soft Clipping¢â IR Input/Output 12 volt trigger out Detachable IEC Power Cable £¼1W Standby Power Consumption Free of lead and other environmentally dangerous substances
PREAMPLIFIER SECTION Line level input, Pre OUT THD (2V in 2V out, CCIF IMD, DIM 100) >0.004% (ref. 20Hz – 20kHz) Signal/Noise ratio IHF >100dB (A-weighted, ref. 500mV) >108dB (A-weighted, ref. 2V, Volume maximum) >92dB (A-weighted, ref. 100mV in 100mV out - unity gain) Channel separation 1kHz >80dB 10kHz >70dB Input impedance (R and C) 100k¥Ø+ 320pF Maximum input signal >8V rms (ref. 0.1 THD) Output impedance Pre out 75¥Ø Tape out Source Z + 1kHz Input sensitivity 159mV (ref. 500mV out) Frequency response ¡¾ 0.1dB (ref. 20Hz - 20kHz, Tone defeat ON) ¡¾ 0.5dB (ref. 20Hz - 20kHz, Tone defeat OFF) Maximum voltage output IHF load >10V (ref. 0.03% THD) 600 ohms load >10V (ref. 0.03% THD) Tone controls Treble ¡¾ 5dB at 10kHz Bass ¡¾ 8dB at 100Hz POWER AMPLIFER SECTION Main IN, Speaker OUT Continuous output power into 8¥Ø and 4¥Ø (Stereo) >50W (ref. rated THD, 20Hz-20kHz, both channels driven) Rated THD (CCIF IMD, DIM 100) <0.009% (ref. 20Hz - 20kHz) Clipping power >65W (ref. 1kHz 1% THD) IHF dynamic power 8¥Ø 100W 4¥Ø 150W 2¥Ø 200W Peak output current >20A (ref. 1¥Ø, 1ms) Signal/Noise ratio >100dB (A-weighted, ref. 1W) >117dB (A-weighted, ref. 150W) Damping factor >100 (ref. 8¥Ø, 50Hz and 1kHz) Frequency response ¡¾ 0.1dB (ref. 20Hz - 20kHz) 3Hz – 70kHz (ref. -3dB) Input impedance 20k¥Ø + 1nF Input sensitivity 630mV (ref. rated power) Voltage gain 29dB Headphone output impedance 68¥Ø > SPECIFICATIONS C 326BEE Stereo Integrated Amplifier Channel separation 1kHz >80dB 10kHz >70dB Trigger Out Output resistance <100¥Ø Output current 50mA Output voltage +12V OVERALL SPECIFICATIONS CD IN, Speaker OUT THD (250mW to rated power, CCIF IMD, DIM 100) <0.009% (ref. 20Hz - 20kHz) Signal/Noise ratio >94dB (A-weighted, ref. 1W) >110dB (A-weighted, ref. 50W, volume set for 2V input) Frequency response ¡¾ 0.2dB (ref. 20Hz - 20kHz, Tone Defeat ON) 10Hz – 65kHz (ref. -3dB) Channel separation 1kHz >80dB 10kHz >70dB Power Consumption Rated power 290W (ref. 230V AC 50 Hz; 120V AC 60Hz) Standby power <1W Idle power <35W PHYSICAL SPECIFICATIONS Dimensions (W x H x D) Net 435 x 100 x 286mm 17 1/8¡± x 4¡± x 11 1/4¡± Gross* 435 x 116 x 332mm 17 1/8¡± x 12 1/2¡± x 13¡± Net weight 15.21 lbs (6.9 kg) Shipping weight 20 lbs (9.1 kg)
»óÇ°Á¤º¸
1. Ç°¸í ¹× ¸ðµ¨¸í : NAD C326 BEE
2. Àü±â¿ëÇ° ¾ÈÀüÀÎÁõ ÇÊ À¯¹« :XU0900849001A
3. Á¤°ÝÀü¾Ð, ¼ÒºñÀü·Â : AC220W 60Hz 1.6A
4. µ¿Àϸðµ¨ÀÇ Ãâ½Ã³â¿ù : 2012³â 10¿ù
5. ¼öÀÔ¿ø : (ÁÖ)¼ÒºñÄÚAV
6. Á¦Á¶»ç : NAD/Áß±¹
7. Á¦Ç°Å©±â: 435 x 116 x 332mm
8. Ç°Áúº¸Áõ±âÁØ : 1³â ¹«»ó A/S ´Ü, ¼ÒºñÀÚ°ú½Ç½Ã ¼öÀÔ¿ø ±ÔÁ¤¿¡ µû¸§.
9. A/S Ã¥ÀÓÀÚ¿Í ÀüȹøÈ£ : 02-2106-2820
|
|