|
|
AMP-150 - High End IntegrateAmplifier
Technical stuff
| Output power (230 VAC) |
2x 150 W RMS 8 Ω / 2x 250 W RMS 4 Ω |
| Input impedance |
20kΩ RCA or 40kΩ Balanced |
| Frequency response |
20 Hz - 20 kHz ± 0.5 dB, and
2 Hz - 100 kHz ± 3 dB |
| Preamplifier output impedance |
100 Ω RCA and 200 Ω Balanced |
| Total Harmonic Distortion |
< 0,05 % at rated power |
| Signal to Noise ratio A-weighted |
> 100 dB |
| Voltage gain |
27 dB (+10 dB headroom) |
| Recommended speaker load |
4 Ω - 16 Ω |
| Load protection |
Speakers < 1.5Ω |
Connectors
| Balanced analogue inputs |
1 pair gold plated XLR Neutrik |
| Unbalanced analogue inputs |
4 pairs of gold plated RCA Stereo |
| Balanced analogue outputs |
1 pair gold plated XLR Neutrik |
| Unbalanced analogue outputs |
1 pair of gold plated RCA Stereo |
| Speaker output |
2 pairs of gold plated safety banana |
Size & Power
| Power Requirements |
115 VAC or 230 VAC, 50 Hz or 60 Hz |
| Fuse |
20mm Sand filled, 6 AT@115 VAC,
3.15 AT@230VAC |
| Power Consumption |
Standby <1 W, Idle < 40 W,
Heat <200 W, Max is 600 W |
| Soft start |
Surge current at startup is < 10A |
| Weight |
13.8 kg / 30.4 lb |
 | |
|
|
|
